ASTM B333 Plate
Manufacturer, Supplier and Exporter of ASTM B333 Plate, ASTM B 333 UNS N10665, ASTM B333 UNS N10675, ASTM B333 Sheet Distributor. Check ASTM B333 Nickel-Molybdenum Alloy Plate, Sheet, and Strip price in India
ASTM B333 – 03(2013)
ASTM B333 is a Standard Specification for Nickel-Molybdenum Alloy Plate, Sheet, and Strip
ASTM B333 specification covers plate, sheet, and strip of nickel-molybdenum alloys covering UNS N10001, N10665, N10675, N10629, and N10624 for use in general corrosive service. ASTM B333 Plate analysis shall be performed on the alloy and shall conform to the chemical composition requirement in nickel, molybdenum, iron, chromium, carbon, silicon, cobalt, manganese, phosphorus, sulfur, vanadium, nickel, molybdenum, aluminum, columbium, copper, tantalum, titanium, tungsten, zirconium, and magnesium. Sheet and strip shall undergo hot or cold rolling, solution annealing, and descaling unless solution annealed in atmosphere. Plates shall undergo hot or cold rolling, solution annealing, and descaling.
Looking to buy Alloy 600 Tubing? Inconel 600 Tubing?
ASTM B333 Material in Stock
ASTM B333 Material Stock
| B333 Plates | B333 Sheet |
|---|---|
| B333 Clad Plate | B333 Clad Sheet |
| B333 Plate | ASME SB333 Plate |
| B333 Sheet | ASME SB333 Sheet |
| B333 Coils | B333 Hot Rolled Plates |
| B333 Shim Sheets | B333 Cold Rolled Plates |
| B333 slitting coils | B333 Perforated sheet |
| B333 Polished Cold Drawn Plates | B333 Strips |
| B333 Foils | B333 Rolls |
| B333 Plain Sheet | B333 2B Plate |
| B333 2D Plate | B333 BA NO(8) Plate |
| B333 Polished Plates | B333 Chequered Plate |
| B333 UNS N10001 | B333 UNS N10665 |
| B333 UNS N10675 | B333 UNS N10629 |
| B333 UNS N10624 |
The following ASTM B333 products are covered under this specification:
1.2.1 ASTM B333 Sheet and Strip—Hot or cold rolled, solution annealed, and descaled unless solution anneal is performed in an atmosphere yielding a bright finish.
1.2.2 ASTM B333 Plate—Hot or cold rolled, solution annealed, and descaled.
ASTM B333 specification covers plate, sheet, and strip of nickel-molybdenum alloys (UNS N10001, N10665, N10675, N10629, and N10624)* for use in general corrosive service.
ASTM B333 Chemical Composition
| Element | Composition Limits, % | ||||
|---|---|---|---|---|---|
| Alloy N10001 | Alloy N10665 | Alloy N10675 | Alloy N10629 | Alloy N10624 | |
| Nickel | remainderA | remainderA | 65.0 min | remainderA | Bal |
| Molybdenum | 26.0–30.0 | 26.0–30.0 | 27.0–32.0 | 26.0–30.0 | 21.0-25.0 |
| Iron | 4.0–6.0 | 2.0 max | 1.0–3.0 | 1.0–6.0 | 5.0-8.0 |
| Chromium | 1.0 max | 1.0 max | 1.0–3.0 | 0.5–1.5 | 6.0-10.0 |
| Carbon, max | 0.05 | 0.02 | 0.01 | 0.01 | 0.01 |
| Silicon, max | 1.0 | 0.10 | 0.10 | 0.05 | 0.10 |
| Cobalt, max | 2.5 | 1.00 | 3.0 | 2.5 | 1.0 |
| Manganese, max | 1.0 | 1.0 | 3.0 | 1.5 | 1.0 |
| Phosphorus, max | 0.04 | 0.04 | 0.030 | 0.04 | 0.025 |
| Sulfur, max | 0.03 | 0.03 | 0.010 | 0.01 | 0.01 |
| Vanadium | 0.2–0.4 | … | 0.20 max | … | … |
| Nickel plus Molybdenum | … | … | 94.0–98.0 | … | |
| Aluminum | … | … | 0.50 max | 0.1–0.5 | 0.5 |
| Columbium (Nb), max | … | … | 0.20 | … | |
| Copper, max | … | … | 0.20 | 0.5 | 0.5 |
| Tantalum, max | … | … | 0.20 | … | |
| Titanium, max | … | … | 0.20 | … | |
| Tungsten, max | … | … | 3.0 | … | |
| Zirconium, max | … | … | 0.10 | … | |
| Magnesium, max | … | … | … | … | … |
ASTM B333 Mechanical Properties
| Alloy | Thickness, in. (mm) | Tensile Strength, min, psi (MPa) | Yield Strength (0.2 % Offset), min, psi (MPa) | Elongation in 2 in. (50.8 mm) or 4DA min, % | Rockwell Hardness,B max |
|---|---|---|---|---|---|
| Sheet and Strip | |||||
| N10001 | Under 3/16 (4.76) | 115 000 (795) | 50 000 (345) | 45 | 100 HRB |
| N10665 | Under 3/16 (4.76) | 110 000 (760) | 51 000 (350) | 40 | 100 HRB |
| N10675 | Under 3/16 (4.76) | 110 000 (760) | 51 000 (350) | 40 | 100 HRB |
| N10629 | Under 3/16 (4.76) | 110 000 (760) | 51 000 (350) | 40 | 100 HRB |
| N10624 | Under 3/16 (4.76) | 104 000 (720) | 46 000 (320) | 40 | 100 HRB |
| Plate | |||||
| N10001 | 3/16 to 21/2 in. (4.76 to 63.5 mm), incl | 100 000 (690) | 45 000 (310) | 40 | 100 HRB |
| N10665 | 3/16 to 21/2 in. (4.76 to 63.5 mm), incl | 110 000 (760) | 51 000 (350) | 40 | 100 HRB |
| N10675 | 3/16 to 21/2 in. (4.76 to 63.5 mm), incl | 110 000 (760) | 51 000 (350) | 40 | 100 HRB |
| N10629 | 3/16 to 21/2 in. (4.76 to 63.5 mm), incl | 110 000 (760) | 51 000 (350) | 40 | 100 HRB |
| N10624 | 3/16 to 21/2 in. (4.76 to 63.5 mm), incl | 104 000 (720) | 46 000 (320) | 40 | 100 HRB |
A D refers to the diameter of the tension specimen.
Pipe, Tube & Tubing
Sheet, Plate
Round Bar & fastenersFF