Monel K500 supplier
Alloy K500 properties, N05500 Nickel alloy
Dealers & distributor of 2.4375 Material, Monel K500 UNS N05500 in Mumbai, IndiaMonel K500 Suppliers
Alloy K500 Suppliers in Mumbai, India
Looking to buy Alloy 600 Tubing? Inconel 600 Tubing?
Check Today’s price of Alloy 600 Tubing in India
Monel K500 Price Per Kg
| Monel K500 Price | Origin | Price in INR (per kg) | Price in USD (per kg) | Price in Euro (per kg) |
|---|---|---|---|---|
| Alloy K500 Price in India | Indian | Rs 1600-1700 as per depend your size requirements | $24 | €20 |
| Monel K500 Price in Japan | Japanese | Rs 1790-1890 as per depend your size requirements | $27 | €23 |
| Alloy K500 Price in UK / Europe | European | Rs 1900-2000 as per depend your size requirements | $28 | €24 |
| Monel K500 Price in USA | USA | Rs 2000-2100 as per depend your size requirements | $30 | €25 |
Monel K500 Price Per Pound
Monel K500 price per pound is 6.14 in the UK. This does not indicate that this would be the price of Monel K500 in other countries in the world like USA, China, Europe, India, Japan, Singapore, etc. For example the price of Monel K500 in America, can be 35% costlier than it is in India. Or the price in India of Monel K500, could be 5% more than it is in China. Another important fact that cannot be neglected is that the cost of Monel K500 is constantly changing.Click here for complete (products, grade & size wise)
Alloy K500 properties
K500 Monel Alloy Chemical Composition
| Monel K500 | Ni | C | Al | Mn | Si | Fe | Cu | S | Ti | Cr |
|---|---|---|---|---|---|---|---|---|---|---|
| Monel K500 | 63.0 min | 0.25 max | 2.3 – 3.15 | 1.5 max | 0.5 max | 05 – 2 | 27.0 – 33.0 | 0.010 max | 0.35 – 0.85 | – |
Monel Alloy K500 Mechanical Properties
| Density | Melting Point | Yield Strength (0.2%Offset) | Tensile Strength | Elongation |
|---|---|---|---|---|
| 8.44 g/cm3 | 1350 °C (2460 °F) | Psi – 1,15,000 , MPa – 790 | Psi – 1,60,000 , MPa – 1100 | 20 % |
Monel K500 Melting Point
1350 °C (2460 °F)Monel K500 Equivalent
Monel K500 equivalent is UNS N05500 and W.Nr. 2.4375. The Chemical Composition of Monel K500 is 2% Iron, 63% Nickel (plus Cobalt), Aluminum 2.30-3.15%, 1.5% Manganese, Titanium 0.35-0.85%, 0.25% Carbon and Copper 27-33%. Monel K500 is widely used for its ease of fabrication. As such, it has use in many applications and industries like oil and gas, paper production, electronic sensors and components, chemical industry, etc. The Density of Monel K500 is 0.305 lb/in³ 8.44 g/cc. Monel K500 has an Elongation at Break of 25%. Monel K500 has a Curie Temperature of -85.0 °F (-65.0 °C).| STANDARD | UNS | WERKSTOFF NR. | AFNOR | EN | JIS | BS | GOST |
|---|---|---|---|---|---|---|---|
| Monel K500 | N05500 | 2.4375 | – | – | – | – | – |
K500 Monel Machining
K500 Monel machining is done in the annealed condition. Alloy K500 is available in various very popular forms like sheets, plates, bars, strips, pipes, rods, wires, tubes, etc. The Ultimate Tensile Strength is 125000 psi (860 MPa). It has a Yield Tensile Strength of 115000 psi (790 MPa). It has an Electrical Resistivity of 0.0000615 ohm-cm. The linear CTE is 13.7 µm/m-°C (7.61 µin/in-°F). The Specific Heat Capacity is 0.100 BTU/lb-°F (0.419 J/g-°C). It has a Thermal Conductivity of 121 BTU-in/hr-ft²-°F(17.5 W/m-K). It has a Liquidus of 1350 °C (2460 °F). The Solidus is 1315 °C (2399 °F).Special Steel
- Carbon Steel Pipe
- ASTM A106 Grade B Pipe
- ASTM A53 Grade B Pipe
- ASTM A333 Grade 6 Pipe
- IS 4923 Steel Pipes
- ASTM A179 Pipe
- ASTM A192 Tube
- BS 3059 Boiler Tube
- SA 210 Boiler Tube
- DIN 2391 ST 52
- ASTM A671 Pipe
- ASTM A671 Grade CC60
- ASTM A671 Grade CC65
- ASTM A671 Grade CC70
- ASTM A672 Pipe
- ASTM A672 Grade C55
- ASTM A672 Grade C60
- ASTM A672 Grade C65
- ASTM A672 Grade C70