Cp Gr2 Titanium Material Supplier
Cp Titanium Grade 2 UNS R50400 and Grade 2 Titanium Price
CP3 Titanium Grade 2, Cp Gr2 Titanium products Supplier, Grade 2 Titanium Price per kg, Titanium Grade 2 for sale in Mumbai, IndiaTable of contents
- Titanium Grade 2 Suppliers
- Cp Titanium Grade 2 Price Per Kg
- Cp Gr2 Titanium Material Composition
- Grade 2 Titanium Melting Point
- Cp Gr2 Titanium Equivalent
Titanium Grade 2 Suppliers, Titanium Alloy Grade 2 price
Titanium Grade 2 Suppliers in Mumbai, India
Looking to buy Alloy 600 Tubing? Inconel 600 Tubing?
Check Today’s price of Alloy 600 Tubing in India
Titanium Grade 2 Price Per Kg
| Titanium Grade 2 Price | Origin | Price in INR (per kg) | Price in USD (per kg) | Price in Euro (per kg) |
|---|---|---|---|---|
| Titanium Grade 2 Price in India | Indian | Rs 1200-1300 as per your requirement sizes | $17 | €14 |
| Titanium Grade 2 Price in Japan | Japanese | Rs 1400-1500 as per your requirement sizes | $21 | €18 |
| Titanium Grade 2 Price in UK / Europe | European | Rs 1500-1600 as per your requirement sizes | $22 | €19 |
| Titanium Grade 2 Price in USA | USA | Rs 1600-1700 as per your requirement sizes | $24 | €20 |
Click here for complete (products, grade & size wise)
Grade 2 Titanium Specifications
| Extrusion | ASME SB-363 |
| Forgings | ASME SB-381 |
| Pipe | ASME SB-337, ASME SB-338 |
| Round Bar/Wire | ASME SB-348, ASTM F-67, AMS 4921 |
| Sheet/Plate | ASME SB-265, AMS 4902 |
| Tubes | ASME SB-337, ASME SB-338, AMS 4942 |
Gr 2 Titanium Alloy Chemical Composition
| Titanium Gr 2 | C | Ti | N | Fe | H | O | V | Al |
|---|---|---|---|---|---|---|---|---|
| 0.1 max | 99.2 min | 0.03 max | 0.3 max | 0.015 max | 0.25 max | – | – |
Titanium Alloy Gr 2 Mechanical Properties
Titanium Grade 2 Yield Strength
| Density | Melting Point | Yield Strength (0.2%Offset) | Tensile Strength | Elongation |
|---|---|---|---|---|
| 4.5 g/cm3 | 1665 °C (3030 °F) | Psi – 39900 , MPa – 275 | Psi – 49900 , MPa – 344 | 20 % |
| ASTM Grade (UNS No.) | GRADE 2 (R50400) |
|---|---|
| Chemical Composition (Max. values unless range is shown) | (wt. %) 0.08C; 0.03N; 0.25O; 0.30Fe; 0.015H |
| TENSILE PROPERTIES | Guar.R.T. Min. | Typical 93°C (200°F) | Typical 204°C (400°F) | Typical 315°C (600°F) | |
|---|---|---|---|---|---|
| Ultimate Strength | MPa (ksi) | 345 (50) | 393 (57) | 283 (41) | 221 (32) |
| Yield Strength, 0.2% offset | MPa (ksi) | 276 (40) | 276 (40) | 166 (24) | 103 (15) |
| Elongation in 51 mm (2″) gage length | (%) | 20 | 28 | 41 | 38 |
| Reduction in Area – Bar, Billet & Forging only | (%) | 30 | 40 | 55 | 75 |
OTHER MECHANICAL PROPERTIES
| Stress to Rupture in Time Shown | Stress MPa (ksi) Time-Hrs. at Temp. (°C) | 276 (40) 10,000 (100) | 240 (35) 10,000 (200) | 117 (17) 1,000 (250) |
| Stress & Time to Produce Elongation Shown (creep) | Stress MPa (ksi) Time-Hrs. at Temp. (°C) Creep (%) | 209 (30) 1,000 (25) 1.0 | 179 (26) 1,000 (150) 1.0 | 103 (15) 1,000 (250) 1.0 |
| Charpy V-Notch Impact @ R.T. | Joules (ft-lbs) | 40 – 82 (30 – 60) | ||
| Bend Radius | Under 1.78 mm (0.070″) thick | 2.0 x Thickness | ||
| 1.78 mm (0.070″) and over | 2.5 x Thickness | |||
| Welded Bend Radius | 2.5-3.0 x Thickness 70 HRB | |||
| Nominal Hardness | 70 HRB | |||
PHYSICAL PROPERTIES
| Nominal Beta Transus | °C (°F) | 913 (1675) |
| Coefficient of Thermal Expansion 10-6/°C (10-6/°F) | 0-100°C (32 -212°F) | 8.6(4.8) |
| 0-315°C (32-600°F) | 9.2(5.1) | |
| 0-538°C (32-1000°F) | 9.7(5.4) | |
| 0-648°C (32-1200°F) | 10.1(5.6) | |
| 0-816°C (32-1500°F) | 10.1(5.6) | |
| Density | g/cm3 (lbs/in3) | 4.51(0.163) |
| Melting Point, Approx. | °C (°F) | 1660 (3020) |
| Electrical Resistivity @ R.T. | 10-6 ohm•cm (10-6 ohm•in) | 56 (22) |
| Modulus of Elasticity – Tension | GPa (103 ksi) | 103 (15) |
| Modulus of Elasticity – Torsion | GPa (103 ksi) | 41 (6.0) |
| Thermal Conductivity | W/m•°C (BTU/hr•ft•°F) | 20.8 (12.0) |
| Specific Heat | J/Kg•°C (BTU/lb•°F) | 520 (0.124) |
| Weldability | Excellent | |
| Industry Specifications | ASTM – B265, B337, B338, B348, B363, B381, B861, B862, F67 and AMS 4902 |
Cp Gr2 Titanium Melting Point
| Melting point | 1670°C, 3038°F, 1943 K |
| Boiling point | 3287°C, 5949°F, 3560 K |
| Density (g cm-3) | 4.506 |
Grade 2 Titanium Equivalent
| STANDARD | UNS | WERKSTOFF NR. |
|---|---|---|
| Titanium Gr 2 | R50400 | 3.7035 |
Cp Gr2 Titanium Material Supplier, Grade 2 Titanium Price
Special Steel
- Carbon Steel Pipe
- ASTM A106 Grade B Pipe
- ASTM A53 Grade B Pipe
- ASTM A333 Grade 6 Pipe
- IS 4923 Steel Pipes
- ASTM A179 Pipe
- ASTM A192 Tube
- BS 3059 Boiler Tube
- SA 210 Boiler Tube
- DIN 2391 ST 52
- ASTM A671 Pipe
- ASTM A671 Grade CC60
- ASTM A671 Grade CC65
- ASTM A671 Grade CC70
- ASTM A672 Pipe
- ASTM A672 Grade C55
- ASTM A672 Grade C60
- ASTM A672 Grade C65
- ASTM A672 Grade C70