ASTM F593 Specification

Manufacturer of ASTM F593M Threaded Rods, ASTM F468 Hexagon Head Cap Bolts, ASTM F593M Bolts, ASTM F593 Socket Head Cap Screws, ASTM F593 Heavy Hex Bolts, ASTM F468M Screws, F468 Hexagon Head Screw, ASTM F468 Hex Head Bolts in Mumbai, India

1. Scope

1.1 ASTM F593 specification covers the requirements for stainless steel bolts, hex cap screws, and studs 0.25 to 1.50 in., inclusive, in nominal diameter in a number of alloys in common use and intended for service applications requiring general corrosion resistance.

1.2 Seven groups of stainless steel alloys are covered, including fourteen austenitic, two ferritic, four martensitic, and one precipitation hardening.

(A) Unless otherwise specified on the inquiry and order, the choice of an alloy from within a group shall be at the discretion of the fastener manufacturer (see 6.1).
(B) See 4.2 for options.
(C) Sizes 0.75 in. and larger may be hot worked and solution annealed, provided the bolts comply with the cold worked (CW) mechanical property requirements.
(D) When approved by the purchaser, Alloys 303, 303Se, or XM1 may be furnished.
(E) When approved by the purchaser, Alloy 430F may be furnished.
(F) When approved by the purchaser, Alloys 416 or 416Se may be furnished.

1.3 Supplementary requirements of an optional nature are provided, applicable only when agreed upon between the manufacturer and the purchaser at the time of the inquiry and order.

1.4 Suitable nuts for use with bolts, hex cap screws, and studs included in this specification are covered by Specification F594. Unless otherwise specified, all nuts used on these fasteners shall conform to the requirements of Specification F594, shall be of the same alloy group, and shall have a specified minimum proof stress equal to or greater than the specified minimum full-size tensile strength of the externally threaded fastener.

1.5 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.

1.6 ASTM F593 standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

astm.org

• Unless otherwise specified on the inquiry and order, the choice of an alloy from within a group shall be at the discretion of the fastener manufacturer
• Sizes 0.75 in. and larger may be hot worked and solution annealed.
• When approved by the purchaser, Alloys 303, 303Se, or XM1 may be furnished.
• When approved by the purchaser, Alloy 430F may be furnished.
• When approved by the purchaser, Alloys 416 or 416Se may be furnished.

ASTM F593 Bolts Chemical Properties

ASTM F593 Bolts Mechanical Properties

BEST PRICE ! READY STOCK OF ASTM F593 / F593M BOLTS

• ASTM F593 Bolts

• ASTM F593 Non Ferrous Bolts

• ASTM F593M Hex Bolts manufacturers

• ASTM F593 Hex Head Bolts Supplier

• ASTM F593 Square Bolts

• ASTM F593M Bolts Exporter in India

• ASTM SF593 Screws Price in India

• F593 Hex Cap Screws Exporter in India

• ASTM F593 Studs Supplier

• ASTM F593 Socket Head Cap Screws Supplier

• ASTM F593M Bolts Manufacturer

• ASTM F593M Threaded Rods Exporter in India

• ASTM F593 Heavy Hex Bolts Distributor

• ASTM F593 Bolts Stockholder

• F593 Hexagon Bolts

• ASTM F593 Hex Head Bolts manufacturers

• ASTM F593M Screws

• F593 Hexagon Head Screw Manufacturer

• ASTM F593 Hexagon Head Cap Bolts

• ASTM F593 Studs