Titanium Bolts Supplier
Aerospace Titanium Fasteners & Din 912 Titanium Fasteners manufacturer in India
Buy Titanium Nuts And Bolts (allen bolts, aircraft bolts), Flange Bolts, Titanium Screws, Titanium Threaded Rod at Best Price
Titanium Bolts
Titanium Fasteners
Titanium Nuts
The Material of Titanium Fasteners are half the weight of steel, so because it has a lower mass, it can be just as strong (as steel) at half the weight. our Titanium Bolts are characterized by its high strength to weight ratio. It is quite ductile in an oxygen free environment and has a low density. These eye bolt and hex cap screws has a very high melting point, which is even greater than 1650 degrees Centigrade or 3000 degrees Fahrenheit. This Material has the chemical symbol “Ti” is paramagnetic alloy. The Titanium Screws are costly compared to Aluminium Fasteners.
Titanium Grade 2 Fasteners are unalloyed, medium strength titanium product. Our Titanium Nuts And Bolts are mostly used in airframes, aircraft engines, and marine parts; good weldability and corrosion resistance are its distinguishing characteristics.
Aerospace Titanium Fasteners has the chemical symbol “Ti”. In unalloyed condition, Our Titanium Aerospace Bolts are 45% lighter, and as strong as steel. These Titanium machine screws, Carriage Bolts, Countersunk Bolts & Engine Bolts are strong and lightweight making them ideal for automotive, aerospace, military and industrial applications. Our Din 912 Titanium Fasteners are suitable for underwater use and can perform in harsh environments. The major producers of these Fasteners are U.S.A, Russia, Germany, Japan and France. Titanium Exhaust Bolts are used in aircraft and aerospace application. These fasteners are now no longer ridiculously expensive, so it makes sense to use them instead Stainless Steel Bolts for coastal environments.
Nirmaan Steel is RINA approved supplier & exporter of Titanium Stud Bolts, Full thread stud, exhaust bolts, turbo bolts, fixings, Ti Grade 2 Round Head Bolts, Hex Cap Screw, Dowel Pins, Flat Washer, Nuts, Flat head cap screw, Heavy Hex Nuts, anchors, inserts, Spring Washer and hose clamps etc. We are stockist & distributor of PTFE- Teflon coated Titanium fasteners, DIN and ISO Metric. Titanium rivets, Check latest price list of Titanium U-bolts, Countersunk Bolts and Carriage Bolts.
Nirmaan Steel is also produce Titanium aircraft fastening hardware like self-locking nuts, wind turbine fasteners, anchor bolt and timber mat bolts (crane mat bolts), threaded inserts and high performance fasteners for aerospace and defense which can be plated in different platings, including zinc chromate, Hot Dip Galvanize etc.
Titanium socket head cap screw also known as an Allen screw or Allen bolt, or simply a cap screw conforming to ISO 4762 or DIN 912.Dowel rods are often cut into short lengths called dowel pins. Our Titanium threaded rod is steel rod with a metric screw thread along its entire length. Titanium Grade 2 Threaded rod is ideal for heavy applications where a longer than normal length of bolt is required. Threaded rod come in a variety of diameters and are sold in 1-metre lengths so you can cut them to the length you require.
We have wide stock of Titanium Screws, Titanium Flange Bolts, Long Bolts (Cable Reel Bolts, Motor Bolts, Thru Bolts), Place Bolt, 12 Point Bolt & Hex Head Cap Screw. Our Dealers & Distributors in India arrange complete range of Titanium Nuts And Bolts in shortest time as well at best price.
Check our latest price list of Titanium pins and studs, Chain Pins, Double End Studs & Single End Studs & two sided fastening product, mail to nirmaansteel@gmail.com for best price of Titanium Hex Washer Screws, Six Lobe Screws, Panel Screws, Thread Cutting Screws, Titanium self tapping screw, Lock and Flange Lock Nuts, Finish Hex Nut, Heavy Hex Nut & Hex Flange Nut in Mumbai, Chennai & Ahmedabad, Gujarat.
Our online Titanium Bolts Weight Calculator allows you to calculate an estimate of the weight of different sizes of Titanium Concrete Screws, shoulder bolt, allen bolt & Threaded Screws based on dimensions, shape and size #4 through M75. Check below table of Titanium Bolt, Nut & Screw sizing chart which shows nominal size and provides convenient weight data.
Table of contents
- Titanium Aerospace Bolts
- Titanium Nuts
- Titanium Bolts
- Titanium Screws
- Titanium Washer
- Titanium Bolt properties
- Titanium Bolts Price
Looking to buy Stainless Steel Bolts ? Stainless Steel Fasteners ?
Check price of Stainless Steel Fasteners manufacturers in India
Titanium Fasteners manufacturers
Titanium Threaded Rod
Titanium Stud Bolt
Titanium Dowel Pin
TITANIUM BOLTS SPECIFICATION
We can produce all Titanium fasteners mentioned below:
| Grade | Product Type | Specification (mm) | Standard | Technique | Application |
|---|---|---|---|---|---|
| Gr2 (Pure Titanium) | Titanium Bolt | M (3-64) *L (5-300) or as your request | GB, DIN, ASTM, ASME, ISO, JIS | Hot forging, CNC Machining, Heat Treatment | Racing, Motorcycle, Bicycle, Electronics, Medical Equipment, Industry, Ship, Sea Water, Desalination, Marine Engineering, Petroleum, Metallurgy and Chemical, Construction Industry, Outdoor and Artware |
| Gr5 (Ti6Al4V) | Titanium Screw | M (3-64) *L (5-300) or as your request | |||
| Titanium Nut | M (3-64) or as your request | ||||
| Titanium Washer | M (3-64) or as your request |
Titanium FASTENERS – SCREWS, BOLTS AND NUTS SPECIFICATIONS & DIMENSIONS
Titanium Fasteners Specifications
| Titanium Bolt | |
|---|---|
| Type | Flange, Hex, Allen, Anchor, Allen Head, Aerospace, Carriage, Countersunk, Engine, Exhaust, U-Bolts, 1/2 Inch, Nuts & Bolts, Metric |
| Product | Titanium and Titanium Grade 2 Customized bolts |
| Size | Diameter: M6-M24, Length: 10mm-300mm (0.39″-11.8″) |
| Material | Gr.1, Gr.2, Gr.5, Gr.7 Titanium Torx Bolts |
| Standard | DIN912, DIN912, DIN933, DIN931 |
| Titanium Threaded stud | |
| Product | Titanium and Titanium Grade 2 threaded stud |
| Size | Diameter: M6-M24, Length: 10mm-300mm (0.39″-11.8″) |
| Material | Gr.1, Gr.2, Gr.5, Gr.7, Gr.23 |
| Standard | DIN912, DIN933, DIN7991, DIN7984, DIN921, ISO 7380, JIS, BS etc. |
| Titanium washer | |
| Product | Titanium and Titanium Grade 2 washer |
| Size | OD: 5mm-200mm, ID: 1mm-100mm, Thickness: 0.1mm-30mm |
| Material | Gr.2, Gr.5 |
| Standard | DIN125 |
| Titanium screw | |
| Types | Titanium Screws, Set Screws, Grub Screws, Hex Head Screws, Machine Screws, Metric Screws, Self Tapping Screws, Socket Head Screws, Socket Cap Screws |
| Product | Titanium and Titanium Grade 2 screw |
| Size | M1 to M42; Length: 10mm-300mm |
| Material | Gr1, Gr.2, Gr.5, Gr.7, Gr.12 |
| Standard | DIN912, DIN933, DIN84, DIN85, DIN963, DIN7991, DIN6912, DIN931, ISO7380 etc. |
| Titanium nut | |
| Types | Lug Nuts, Acorn Nuts, Coupling Nuts, Dome Nuts, Flange Nuts, Square Nuts |
| Product | Titanium and Titanium Grade 2 nut |
| Size | M3-M22 |
| Material | Gr1, Gr.2, Gr.5, Gr.7, Ti6Al4V ELI |
| Standard | DIN, ISO, JIS, etc. |
| Specialized in | Anchor Bolts, Allen Head Bolts, Stud Bolts, Hex Bolts |
| Material | Titanium Fasteners |
| Size / Length | M 02 to M 160 / 3 mm to 200 mm |
| Threads | METRIC, BSW, BSF, UNC, UNF or as required |
| Standard | DIN, ISO, JIS, GB, IS, BS, ASTM, ANSI (ANSI B 18.2.1, B 18.2.4 1M), ASME B18.5 |
| Scope of Manufacture | Hot Forged up to M36/1-1/2″ Dia; CNC Machined up to M100/4″ Dia. |
| Finishing & Coating | Zinc, Dacromet, Anodizing, Nickel plated, Passivated, Hot Dip Galvanized (HDG), Sherardized, PTFE (Teflon), Xylan, Cadmium. |
| Head Drives & Process | Phillips, Slotted, Six-Lobe; Cold Forging, Machining & CNC for customized elements. |
| Product Types | Bolts (Hex, Eye, Square, U, T, Lag), Nuts (Hex, Coupling, Square, Wing, Dome, Acorn), Screws (Hex Head, Socket, Anchor, Machine), Washers (Machine, Lock, Star, Split). |
| Test Certificates | EN 10204/3.1, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection. |
Titanium Aerospace Bolts
Types of Titanium Aerospace Bolts Types of Titanium Fasteners, Nut Bolt Titanium fasteners types are numerous and they are used in various industries and applications such as telecommunication, airlines, medical equipment, aerospace, sheet metal fabrication, commercial airliners, electronic equipment, repair and overhaul (MRO), military, maintenance, original equipment manufacturers (OEMs), computer peripherals, etc. If you are on the lookout for titanium fasteners and you have not been able to get what you have been seeking, then you can be sure that you will get it here. We are a PED approved manufacturer of titanium fasteners in India, so you can be sure that our quality is of the highest kind.| Titanium Fasteners | Titanium Bolt |
|---|---|
| Custom Titanium Fasteners | Titanium Automotive Fasteners |
| Titanium Bicycle Fasteners | Titanium Fasteners Din 912 |
| Titanium Grade 2 Bolt | Titanium Grade 5 Bolt |
| Titanium Stud Bolt Manufacturers | Titanium Grade 2 Bolts |
| Titanium Grade 2 Punched Washer Distributor | Titanium Grade 2 Bolts Manufacturer |
| Titanium Pan Head Screw | Titanium Grade 5 Square Nut Exporter |
| Titanium Insert Nuts | Titanium Welding Studs |
| Titanium Grade 2 Pan Head Screw Stockist | ASTM B166 Titanium Cap Screw |
| Titanium Grade 2 Bolts Manufacturer | Titanium Foundation Bolts |
| Titanium Threaded Rod Stockist | Titanium Dowel Pin Traders |
| Titanium Hex Bolts Manufacturer | Titanium Hex Head Bolts Manufacturer |
| Titanium Nuts Suppliers | Titanium Washers |
| Titanium Fender Washer | UNS R50400 Lock Nut Suppliers |
| Titanium Square Bolts Manufacturer | Titanium Tie Bar Exporter |
| Titanium Locking Nuts Manufacturer | Titanium Coupler Nuts |
| Titanium Flat Washer | Titanium Countersunk Slotted Screw |
| Titanium Double Ended Stud | Titanium Grade 2 Studbolt |
| Titanium Blind Fasteners (rivets, rivet nuts, cage nuts) | Titanium Grade 2 Industrial fasteners and fixings |
| Titanium Pins and Keys | Titanium Self Drilling Screws |
| Titanium Self-tapping / Thread forming screws | Titanium Self Clinching Fasteners |
Titanium Nuts
Buy Titanium Lug Nuts, Acorn Nuts, Coupling Nuts, Dome Nuts, Flange Nuts, Square Nuts at best Price in India.
A Titanium nut is a type of Titanium fastener with a threaded hole. Titanium Nuts are almost always used in conjunction with a mating bolt to fasten multiple parts together.
| Titanium NUTS | ||||
|---|---|---|---|---|
Titanium Hexagon nuts
with flange
|
Titanium Hexagon nuts
with flange
|
Titanium Hexagon nuts with flange with metric fine thread
|
Titanium Hexagon nuts with (non-metallic insert) type1
|
Titanium Hexagon nuts with (all-metal nuts), type 2
|
Titanium Hexagon nuts, style 1 – Product grades A and B
|
Titanium Hexagon nuts, style 2 – Product grades A and B
|
Titanium Hexagon nuts, low type (chamfered)
|
Titanium Low hex nuts without bevel – Classification B
|
Titanium Hexagon nuts, style 1, with metric fine thread
|
Titanium Hexagon nuts, style 2, with metric fine thread
|
Titanium Low hex nuts (chamfered) with metric fine pitch thread
|
Titanium Hexagon nuts with flange and (with non-metallic insert)
|
Titanium Hexagon nuts with metric fine thread
|
Titanium Hexagon nuts with (all-metal nuts)
|
Titanium Hexagon nuts with clamping part
|
Titanium Hexagon nuts with low form, (with non-metallic insert)
|
Titanium Castle nuts low form (with roll crown)
|
Titanium crown nuts (without roll crown)
|
Titanium crown nuts (with roll crown)
|
Titanium Castle nuts low form (without roll crown)
|
Titanium Hexagon nuts
|
Titanium Closed nuts
|
Titanium Cross hole nuts
|
Titanium slot nuts
|
Titanium locknuts |
Titanium knurled |
Titanium knurled nuts, low form
|
||
Titanium Bolts
ASTM B348 Titanium Flange Bolts, Hex Bolts, Allen Bolts, Anchor Bolts, Allen Head Bolts, Aerospace Bolts, Carriage Bolts, Countersunk Bolts, Engine Bolts, Exhaust Bolts, U Bolts, 1/2 Inch Bolts, Nuts And Bolts, M5 Bolts, Metric Bolts
Titanium bolts are readily weldable with conventional welding processes and this is particularly useful for Titanium weld studs. Titanium Grade 2 Bolt is often chosen for its weldibility compared to other highly alloyed nickel-base alloys. Titanium Bolt types be used in flange connections. Type A: Titanium Stud Bolt, Type B: Titanium Hex Bolt.
In Petro and chemical industry for flange connections Titanium Stud Bolts and Hex Bolts are used. The Titanium Stud Bolt is a threaded rod with 2 heavy hexagon nuts, while the Titanium Hex Bolt has a head with one nut. Nuts and head are both six sided.
| Titanium HEX BOLTS | ||||
|---|---|---|---|---|
EN 1665 F Titanium Hexagon bolts with flange, heavy series, Form F |
ISO 4014 Titanium Hexagon bolts with shaft, product classes A and B |
ISO 4017 Titanium Hexagon bolts with thread to the head – Product grades A and B |
ISO 8676 Titanium Hexagon bolts with thread to head, metric fine thread |
ISO 8765 Titanium Hexagon head bolts with shank, metric fine thread |
ISO 4018 Titanium Hexagon bolts with thread to head |
ISO 4016 Titanium Hexagon bolts with shaft, product class C |
EN 24015 Titanium Hexagon head bolts with shank, relieved shank |
CSN 02 1104 Titanium Bright hexagon bolts with hole in the head |
CSN 02 1105 Titanium Bright hexagon bolts with slot |
Titanium Screws
Manufacturer of All types of Titanium Screws such as Set Screws, Grub Screws, Hex Head Screws, Machine Screws, Metric Screws, Self Tapping Screws, Socket Head Screws, Socket Cap Screws in India
Titanium screws are commonly used fasteners to keep the machine parts together. There are many different types of Titanium Grade 2 screws available including Titanium Grade 2 Set screws, Socket Head Cap Screws and Button Head Socket Screw etc.
| Titanium CAP SCREWS | ||||
|---|---|---|---|---|
Titanium Cap Screws |
ISO 1580 Titanium flat head screw |
ISO 21269 Titanium Machine screws |
ISO 14579 Titanium cheese head screws |
ISO 2342 Titanium Slotted set screws |
| Titanium TAPPING SCREW | ||||
|---|---|---|---|---|
ISO 1479 Titanium Self tapping screws |
ISO 15482 Z Titanium Self drilling screw |
ISO 10642 Titanium countersunk screws | ||
| Titanium OTHER SCREWS | ||||
|---|---|---|---|---|
CSN 02 1167 Titanium eyebolts |
CSN 02 1174 Titanium Studs – = 1d |
CSN 02 1174 Titanium Studs – = 1d |
CSN 02 1176 Titanium Studs – = 1.25d |
CSN 02 1176 Titanium Studs – = 1.25d |
CSN 02 1178 Titanium Studs – = 2d |
CSN 02 1178 Titanium Studs – = 2d |
CSN 02 1341 Titanium screws T (M10 – M36x3) |
CSN 02 1341 Titanium screws T (M42x3 – M100x4) | |
Titanium Washers
ASTM B348 Titanium Grade 2 FLAT WASHER, Titanium PUNCHED WASHER, Titanium Grade 2 MACHINED WASHER, Titanium ROUND WASHER, Titanium SQUARE WASHER SUPPLIER & EXPORTER IN INDIA. Titanium SPRING WASHER, Titanium Grade 2 LOCK WASHER, Titanium SPHERICAL WASHER, Titanium Grade 2 PLAIN WASHER STOCKIST
A Titanium washer is a thin plate with a hole that is normally used to distribute the load of a threaded fastener, such as a screw or nut.
| Titanium WASHERS | ||||
|---|---|---|---|---|
ISO 7090 Flat washers normal series, Titanium |
ISO 7089 Flat washers normal series, Titanium |
ISO 7091 Flat washers normal series, Titanium |
ISO 7092 Flat washers small series, Titanium |
ISO 7093-1 Plain washers, large series, Titanium |
ISO 7093-2 Plain washers, large series, Titanium |
ISO 7094 Flat washers, Extra large series, Titanium |
ISO 10673 L Plain washers for bolts, Titanium |
ISO 10673 N Plain washers for bolts, Titanium |
ISO 10673 S Plain washers for bolts, Titanium |
EN 28738 Washers for clevis pins, Titanium |
CSN 02 1740 spring rings with square cross section, Titanium |
CSN 02 1741 spring rings with rectangular cross-section, Titanium | ||
- Hex Head Bolts ISO 4014 (DIN 931), Titanium
- Hex Head Set screws ISO 4017 (DIN 933), Titanium
- Hex Head Flange Bolts ISO 1665 (DIN 6921), Titanium
- Slotted Hex Head Setscrews (DIN 933), Titanium
- Socket Head Cap Screws ISO 4762 (DIN 912), Titanium
- Socket Head Cap Screws With Fine Thread ISO 4762 (DIN 912), Titanium
- Socket Head Cap Screws With Full Thread ISO 4762 (DIN 912), Titanium
- Unbrako Socket Head Cap Screws ISO 4762, Titanium
- Torx Head Cap Screws ISO 14579 (sim. DIN 912), Titanium
- Socket Low Head Cap Screws DIN 7984, Titanium
- Torx Cap Screws With Low Head ISO 14580 (sim. DIN 7984), Titanium
- Socket Head Button Screws ISO 7380 part 1, Titanium
- Unbrako Socket Head Button Screws ISO 7380, Titanium
- Torx Button Screws, Titanium
- Pin Torx Button Screws, Titanium
- Socket Head Button Screws With Flange ISO 7380 part 2, Titanium
- Slotted Mushroom Head Screws, Titanium
- Phillips Pan Head Machine Screws ISO 7045 (DIN 7985H), Titanium
- Pozi Pan Machine Screws ISO 7045 (DIN 7985Z), Titanium
- Phillips Raised Csk Machine Screws ISO 7047 (DIN 966H), Titanium
- Pozi Raised Csk Machine Screws, Titanium
- Phillips Csk Machine Screws ISO 7046 part 1 & 2 (DIN 965H), Titanium
- Pozi Csk Machine Screws ISO 7046 part 1 & 2 (DIN 965Z), Titanium
- Slotted Raised Csk Machine Screws ISO 2010 (DIN 964), Titanium
- Socket Head Countersunk Screws ISO 10642 (DIN 7991), Titanium
- Unbrako Socket Head Countersunk Screws ISO 10642, Titanium
- Slotted Csk Machine Screws ISO 2009 (DIN 963), Titanium
- Torx Csk Head Screws ISO 14581, Titanium
- Pin Torx Countersunk Screws, Titanium
- Slotted Cheese Head Machine Screws ISO 1207 (DIN 84), Titanium
- Slotted Pan Machine Screws ISO 1580 (DIN 85), Titanium
- Torx Pan Head Screws ISO 14583, Titanium
- One Way Security Screws, Titanium
- Slotted Capstan Screws (DIN 404), Titanium
- Flat Point Grub Screws ISO 4026 (DIN 913), Titanium
- Cone Point Grub Screws ISO 4027 (DIN 914), Titanium
- Cup Point Grub Screws ISO 4029 (DIN 916), Titanium
- Dog Point Grub Screws ISO 4028 (DIN 915), Titanium
- Carriage Bolts DIN 603, Titanium
- Carriage Bolts and Nuts DIN 603 (Bolt) DIN 934 (Nut), Titanium
- Wing Screws DIN 316 American Form, Titanium
- Thumb Screws High Type (DIN 464), Titanium
- Slotted Thumb Screws High Type (DIN 465), Titanium
- Dowel Screw (Hanger Bolt) with metric and wood thread, and central hex drive, Titanium
- Threaded Rods DIN 975, Titanium
- Plastic Head Covers for Hex Screws/Nuts, Titanium
- Full Hex Nuts Standard Pitch - ISO 4032 (DIN 934), Titanium
- Full Hex Nuts Fine Pitch - ISO 8673 (DIN 934), Titanium
- Full Hex Nuts With Left Hand Thread (DIN 934), Titanium
- Half Nuts Coarse Pitch ISO 4035 (DIN 439 part 2), Titanium
- Half Nuts Fine Pitch ISO 4035, Titanium
- Half Nuts With Left Hand Thread, Titanium
- Thick Nyloc Nuts (Type P) ISO 10512 (DIN 982), Titanium
- Thin Nyloc Nuts (Type T) ISO 10511 (DIN 985), Titanium
- Aerotight All Metal Locking Nuts, Titanium
- Stover Nuts, Titanium
- Dome Nuts DIN 1587, Titanium
- Dome Nyloc Nuts DIN 986, Titanium
- Cap Nuts DIN 917, Titanium
- Hex Serrated Flange Nuts EN 1661 (DIN 6923), Titanium
- Hex Plain Flange Nuts, Titanium
- Hex Plain (Non-Serrated) Flange Nuts with Nylon Insert, Titanium
- Hex Serrated Flange Nuts with Nylon Insert, Titanium
- Hexagon Nut (Type B) with height 1.5 x thread diameter, Titanium
- Hexagon Nut with Collar and height 1.5 x thread diameter, Titanium
- Wing Nuts DIN 315 American Form, Titanium
- Wing Nuts DIN 315 German Form, Titanium
- Thumb Nuts High Type DIN 466, Titanium
- Square Nuts, Titanium
- Square Thin Nuts, Titanium
- Sleeve Nuts With Pan Head and Slot, Titanium
- Studding Connector Nuts, Titanium
- Castle Nuts DIN 935, Titanium
- Hexagon Coupler Nut, Titanium
- Round Coupler Nut, Titanium
- Counter Nuts DIN 7967, Titanium
- Hexagon Weld Nuts, Titanium
- Square Weld Nuts DIN 928, Titanium
- Cage Nuts - Metric Thread, Titanium
- Pronged Tee Nuts (4 Prongs), Titanium
- Slotted Round Nuts for hook spanner DIN 1804, Titanium
- Plastic Head Covers for Hex Screws/Nuts, Titanium
| Titanium BOLTS AND SETSCREWS (NORMAL AND HEAVY SERIES) | ANSI | B18.2.1 | |||
| DIN | 931 | 933 | |||
| BS | 1083 | 1768 | 1769 | 3692 | |
| ISO | 4014 | 4017 | |||
| Titanium SOCKET CAPSCREWS (1936 & 1960 SERIES) | |||||
| ANSI | B18.3 | ||||
| DIN | 912 | 913 | 916 | 6912 | |
| BS | 2470 | 4168 | |||
| ISO | 4762 | ||||
| Titanium STUDBOLTS | |||||
| ANSI | B16.5 | ||||
| DIN | 975 | 976 | |||
| BS | 4882 | ||||
| Titanium NUTS (NORMAL AND HEAVY SERIES) | |||||
| ANSI | B18.2.2 | ||||
| DIN | 934 | ||||
| BS | 1083 | 1768 | 1769 | 3692 | |
| ISO | 4032 | ||||
| Titanium ENGINEER STUDS | DIN | 938 | 939 | 2510 | |
| BS | 2693 | 4439 | 4882 | ||
| Titanium WASHERS | Flat | Tab | Spring | Special designs |
Thread Forms for Titanium Fasteners, Studs & Bolts
| ALL FASTENERS CAN BE SUPPLIED WITH THE FOLLOWING THREAD FORMS: | ||
| METRIC | Metric fine | Metric coarse |
| UN | UNC | UNS |
| UN8 | UNF | |
| WHITWORTH | BSW | BSF |
ANCILLARY PROCESSES of Titanium Fasteners, Bolts, Nuts
| HEAT TREATMENT | Quenching and tempering | Thru Hardening |
| Normalising | Solution Annealling | |
| Nitriding | Precipitation Hardening | |
| Case Hardening | ||
| COATINGS | Zinc | Phosphate |
| Zinc Nickel | Molykote | |
| Hot Dip Galv | Sherardizing | |
| PTFE/Xylan/Xylar/Teflon | Cadmium |
Titanium Bolts- DIN 933, 931, 603, 571, 912, 7991, ISO-7380.
Titanium Bolts Type: BOLTS, SETS, CUP SQUARE, COACH SCREW, SOCKET CAP, SOCKET COUNTERSUNK, SOCKET BUTTON
| Titanium Screws Type | SIZE | GRADE | ASME | ISO | ASTM |
|---|---|---|---|---|---|
| Titanium Socket Head Cap Screw | M1.6 to M64 | 12.9 | B18.3.1 M | 4762 | A574M |
| Titanium Socket Low Head Cap Screw | M4 to M20 | 10.9 | |||
| Titanium Socket Head Shoulder Screw | M6 to M24 | 012.9 | B18.3.3M | ||
| Titanium Countersunk Socket Head Screw | M3 to M20 | 012.9 | B18.3.5M | 10642 | F835M |
| Titanium Button Head Socket Screw | M3 to M12 | 012.9 | B18.3.4M | 7380 | F835M |
| Titanium Flange Button Head Socket Screw | M3 to M10 | 012.9 | F835M | ||
| Titanium Knurled Point Socket Set Screw | M3 to M20 | 45H | B18.3.6M | 4029 | F912M |
| Titanium Flat Point Socket Set Screw | M6 to M12 | 45H | B18.3.6M | 4026 | F912M |
| Titanium Dog Point Socket Set Screw | M3 to M20 | 45H | B18.3.6M | 4028 | F912M |
| Titanium Cone Point Socket Set Screw | M3 to M12 | 45H | B18.3.6M | 4027 | F912M |
| Titanium Plain Point Socket Set Screw | M3 to M20 | 45H | B18.3.6M | 4029 | F912M |
| Titanium Taper Pressure Plug | M8 to M22 | - |
| Titanium Bolt Type | SIZE | PROPERTY CLASS | TENSILE STRENGTH | STANDARD |
|---|---|---|---|---|
| Titanium Hex Head Bolt / Screw | M4 to M80 | 10.9 | 1040N / mm2 min | ISO 4017 (Full Thread) ISO 4014 (Half Thread) |
| Titanium Nuts Type | SIZE | PROPERTY CLASS | STANDARD |
|---|---|---|---|
| Titanium Hex Nut | M6 to M42 | 10 | ISO 4032 |
| Titanium Nylock Nut | M6 to M20 (Gr.8) M10 to M24 (Gr.10) | 8 & `10 | DIN 982 |
| Titanium Nylock Nut | M6 to M20 (Gr.8) M10 to M24 (Gr.10) | 8 & 10 | DIN 985 |
| Titanium Hex Weld Nut | M6 to M12 | 8 | DIN 929 |
| Titanium Washers Type | SIZE | HARDNESS | STANDARD |
|---|---|---|---|
| Square Section Spring Washer, Titanium | 3mm to 39mm | HV (430 to 530) | DIN 7980 |
| Flat Section Spring Washer, Titanium | 3mm to 39mm | HV (430 to 530) | DIN 127 B |
| Hardened Washer, Titanium | 12mm to 30mm | HV (300 to 370) | IS 2016 |
| Hardened Steel Washer, Titanium | 12mm to 56mm | Rockwell 26 to 45 (HDG) Rockwell 38 to 45 (Coated) | ASTM F436M |
Durlok® - Anti Vibration
| Anti vibration bolts and nuts | SIZE | PROPERTY CLASS | TENSILE STRENGTH | STANDARD |
|---|---|---|---|---|
| Durlok® Bolt | M6 to M20 | 12.9 | 1220N / mm2 min | As Per Unbrako Specification |
| Durlok® Nut | M6 to M20 | 12 | Hardness HRC 28 to 36 | As Per Unbrako Specification |
| Durlok®Washer | M6 to M20 | HRC 47 to 52 | As Per Unbrako Specification |
Full Range of Fastener Products both Imperial & Metric. Dimensions range from M3 to M72 and quantities from 1 to 10,000.
| Hexagon Bolts / Set Screws | Stud Bolts | Hexagon Nuts | Socket Cap screws |
|---|---|---|---|
| DIN 931 | BS4882 | DIN 934 | DIN 912 |
| DIN 933 | DIN 976 | BS 1768 | DIN 6912 |
| BS 1768 | BS 1769 | DIN 7984 | |
| UNI 5731 | BS 1083 | ANSI B18.3 | |
| UNI 5739 | BS 3692 | ISO 4762 | |
| ISO 4014 | ISO 4032 | UNI 5931 | |
| ISO 4017 | ISO 4033 | BS 2470 | |
| BS 1769 | ANSI B18.2.2 | BS 4168 | |
| BS 3692 | |||
| ANSI B18.2.1 |
| Socket & Slotted Set Screws | Socket & Slotted Countersunk Screws | Studs | Washers |
|---|---|---|---|
| DIN 913 | DIN 963 | DIN 938 | DIN 125 |
| DIN 914 | DIN 7991 | DIN 939 | DIN 9021 |
| DIN 915 | BS 4168 | DIN 2510 | BS 4320 |
| DIN 916 | BS 1981 | BS 4439 | BS 3410 |
| DIN 551 | BS 483 | BS 2693 | |
| DIN 553 | BS 2470 | Spring Washers | |
| DIN 438 | DIN 127 | ||
| BS 4168 | BS 4464 | ||
| BS 1802 |
ANSI and/or ASME Standards (inch series)
| B18.1.1 | Small Solid Rivets | B18.8.1 | Clevis Pins and Cotter Pins |
|---|---|---|---|
| B18.1.2 | Large Rivets | B18.8.2 | Taper Pins, Dowel Pins, Straight Pins, Grooved Pins and Spring Pins |
| B18.2.1 | Square and Hex Bolts and Screws | B18.9 | Plow Bolts |
| B18.2.2 | Square and Hex Nuts | B18.10 | Track Bolts and Nuts |
| B18.2.6 | Fasteners for use in Structural Applications | B18.11 | Miniature Screws |
| B18.3 | Socket Cap, Shoulder and Set Screws | B18.13 | Screw and Washer Assemblies (Sems) |
| B18.5 | Round Head Bolts | B18.15 | Forged Eyebolts |
| B18.6.2 | Slotted Head Cap Screws, Square Head Set Screws, and Slotted Headless Set Screws | B18.17 | Wing Nuts, Thumb Screws and Wing Screws |
| B18.6.3 | Machine Screws and Machine Screw Nuts | B18.21.1 | Lock Washers |
| B18.6.4 | Thread Forming and Thread Cutting Tapping Screws and Metallic Drive Screws | B18.22.1 | Plain Washers |
| B18.7 | General Purpose Semi- Tubular Rivets, Full Tubular Rivets, Split Rivets and Rivet Caps | B18.23.1 | Beveled Washers |
Titanium Bolts Properties
Titanium bolts properties are that they are corrosion resistant, lightweight and strong. Titanium bolts have a density of 4.51 g /cm3. As compared with other metal bolts, the highest strength-to-weight ratio is possessed by titanium bolts. Titanium bolts are as strong as bolts made from stainless steel or bolts made from mild steel. Titanium bolts are totally resistant to solutions of chlorates, chlorides, chlorine dioxide, perchlorates and hypochlorites. Titanium bolts can remain strong about a mile below the ocean. Bolts made from titanium can resist seawater corrosion, in temperatures as much as 500 °F.
| Titanium Aircraft Fasteners properties | |||
|---|---|---|---|
| Standard | Description | Standard | Description |
| DIN 84 | Slotted cheese head screws | DIN 439 | Jam nuts |
| DIN 125 | Flat washers | DIN 963 | Slotted countersunk flat head screws |
| DIN 127 | Spring lock washers | DIN 965 | Phillips flat head machine screws |
| DIN 912 | Hex socket head cap screws | DIN 985 | Lock nuts (with non-metallic insert) |
| DIN913/DIN 914/DIN915/DIN916 | Set screws | DIN 1665/DIN 6921 | Hex bolts with flange |
| DIN 931 | Hex head cap screws (part thread) | DIN 6912/DIN 7984 | Hexagon socket thin head cap screws |
| DIN 933 | Hex head cap screws (full thread) | DIN 7991 | Flat head countersunk socket cap screws |
| DIN 934 | Hex nuts | DIN 9021 | Flat washer |
| Chemical components of Titanium Alloy Fasteners | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Grade | Fe% | C% | N% | H% | O% | Al% | V% | Mo% | Ni% | Pd% | Ti |
| Grade 1 | 0.2 | 0.08 | 0.03 | 0.015 | 0.18 | — | — | — | — | — | BAL. |
| Grade 2 | 0.3 | 0.08 | 0.03 | 0.015 | 0.25 | — | — | — | — | — | BAL. |
| Grade 3 | 0.3 | 0.08 | 0.05 | 0.015 | 0.35 | — | — | — | — | — | BAL. |
| Grade 4 | 0.3 | 0.08 | 0.05 | 0.015 | 0.40 | — | — | — | — | — | BAL. |
| Grade 5 | 0.25 | 0.08 | 0.03 | 0.015 | 0.02 | 5.5-6.75 | 3.5-4.5 | — | — | — | BAL. |
| Grade 7 | 0.3 | 0.08 | 0.03 | 0.015 | 0.25 | — | — | — | — | 0.12-0.25 | BAL. |
| Grade 9 | 0.25 | 0.08 | 0.03 | 0.015 | 0.15 | 2.5-3.3 | 2.0-3.0 | — | — | — | BAL. |
| Grade 12 | 0.3 | 0.08 | 0.03 | 0.015 | 0.25 | — | — | 0.2-0.4 | 0.6-0.9 | — | BAL. |
| Grade 23 | 0.3 | 0.08 | 0.03 | 0.015 | 0.13 | 5.5-6.75 | — | — | — | — | BAL. |
| Grade | Tensile Strength (min) | Yield Strength 0.2% Offset | Elongation in 2 inch or 50mm % (min) | ||
|---|---|---|---|---|---|
| KSI | MPa | KSI | MPa | ||
| Grade 1 Bolts | 35 | 240 | 20-45 | 138-310 | 24 |
| Grade 2 Bolts | 50 | 345 | 40-65 | 275-450 | 20 |
| Grade 3 Bolts | 65 | 450 | 55-80 | 380-550 | 18 |
| Grade 4 Bolts | 80 | 550 | ≥70 | ≥483 | 15 |
| Grade 5 Bolts | 138 | 950 | ≥128 | ≥880 | 14 |
| Grade 7 Bolts | 50 | 345 | ≥40 | ≥275 | 24 |
| Grade 9 Bolts | 125 | 860 | ≥105 | ≥725 | 10 |
| Grade 12 Bolts | 70 | 483 | ≥50 | ≥345 | 18 |
| Grade 23 Bolts | 125 | 860 | ≥115 | ≥790 | 15 |
| Titanium Bolts Price | Titanium Fasteners Price List | Price Per Pcs. | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Titanium Hex head bolt price | USD $6.25 | ||||||||||
| Titanium Machine bolt price | USD $5.50 | ||||||||||
| Titanium Screws price | USD $3.40 | ||||||||||
| Titanium Socket Head Cap Screw price | USD $3.40 | ||||||||||
| Titanium Allen bolt price | USD $5.00 | ||||||||||
| Titanium Dowel Pins price | USD $1.40 | ||||||||||
| Titanium Nuts price | USD $1.40 | ||||||||||
| Titanium Washer price | USD $1.40 | ||||||||||
Special Steel
- Carbon Steel Pipe
- ASTM A106 Grade B Pipe
- ASTM A53 Grade B Pipe
- ASTM A333 Grade 6 Pipe
- IS 4923 Steel Pipes
- ASTM A179 Pipe
- ASTM A192 Tube
- BS 3059 Boiler Tube
- SA 210 Boiler Tube
- DIN 2391 ST 52
- ASTM A671 Pipe
- ASTM A671 Grade CC60
- ASTM A671 Grade CC65
- ASTM A671 Grade CC70
- ASTM A672 Pipe
- ASTM A672 Grade C55
- ASTM A672 Grade C60
- ASTM A672 Grade C65
- ASTM A672 Grade C70