ASTM A213 Grade T11 Alloy Steel Boiler Tube
SA 213 T11 Seamless Tubing Material supplier in India
A213 T11 Tube
SA213 T11 Boiler Tube
SA213 T11 Seamless Alloy Tube
What is SA213 T11 Seamless Alloy Tube
The answer to what is SA213 T11 seamless alloy tube is that these are essentially cold drawn seamless tubes. These SA213 T11 tubes are used in shafts, cylinders, bearings, machining parts, etc. They are available in all kinds of sizes and if you do not find a size that you are seeking right here at our website, then all you have to do is just get in touch with us and we will make the size that you want, to meet your desired needs. SA213 T11 seamless alloy tubes are ubiquitous and they can be found in use in various areas such as laboratories, industrial locations, underground, within residential walls, in commercial places, etc.
T11 Alloy Steel Tube exhibits superior high-temperature strength and creep behavior compared to other low-alloy ferritic steels. T11 Alloy Steel Seamless Tube is stronger than welded ASME SA213 T11 Tubing – and are made by rolling a preheated billet between offset rolls to create a tube shell. These ASME SA213 T11 Alloy Steel Seamless Tube, SA213 Boiler tubing, the oil and gas industries and automotive transmission components are typical applications. We stock precision Alloy Steel T11 Seamless Tubing for mechanical applications that satisfy both the European norm, EN 10305-1 and the various national standards in force. All SA213 T11 Alloy Steel Seamless Tubing, AS T11 Tubes, T11 Steel Tubes, ASME SA213 AS T11 Tubes, SA213 gr T11, SA213 grade T11 and SA213 T11 Pipe are cold drawn to ensure the most accurate dimensional tolerances.
SA 199 T11 material specification was Seamless Cold-Drawn Intermediate Alloy-Steel Heat-Exchanger and Condenser Tubes, SA199 T11 material specification was withdrawn in 1995, and replaced with SA200 T11, which was withdrawn in 1999, and replaced with SA 213 T11.
Stockist of ASTM A213 Gr T11 Tube Material, Alloy Steel T11 Tube & Alloy Steel T11 Tubing. Check UNS K11597 Seamless Tube, SA213 T11 Pipe Price in India.
Table of contents
- SA213 T11 Boiler Tube Price in India
- ASTM A213 T11 Tube Specification
- SA213 T11 Seamless Alloy Tube Equivalent
- SA213 T11 Material Composition
- T11 Tube Material mechanical properties
- ASTM A213 Gr T11 Seamless Tube
- T11 Welded Tube
- T11 Tubing Weight
- SA213 T11 Pipe Welding Procedure
- SA213 T11 Material Weight Calculator
- Difference Between Low-Alloy Steel & High-Alloy Steel
Looking to buy SA213 T91 Tube? SA213 T91 Material?
Check Today’s price of SA213 T91 in India
SA213 T11 Boiler Tube Price in India
Size” | MSL Make | ISMT make | JSL Make |
|---|---|---|---|
1/2″ | 2,352.94 | 2,345.59 | 2,360.29 |
3/4″ | 2,132.35 | 2,125.00 | 2,139.71 |
1″ | 1,985.29 | 1,977.94 | 1,992.65 |
1.25″ | 1,941.18 | 1,933.82 | 1,948.53 |
1.5″ | 1,838.24 | 1,830.88 | 1,845.59 |
Please note: All Above Prices are USD $/Ton. All price applicable for SCH 40, SCH 60, SCH 80 & SCH XS T11 Tube.
ASTM A213 T11 Tube Specification
A213 T11 Material Standard | ASTM A213 T11, SA213 T11 (with IBR Test Certificate) |
ASTM A213 Gr T11 Tube Specifications | ASTM A213 & ASTM A209 (T1 , Ta, T1b) BS/3059/90/PartII/620 & 622 DIN/17175/13CrMo44 DIN/17175/10CrMo910 DIN/17175/15Mo3 |
T11 Tubing Size | 6.35 mm OD to 101.6 mm OD |
Sch. & Swg. | 10 Swg., 12 Swg., 14 Swg., 16 Swg., 18 Swg., 20 Swg., 3.6 mm Thk |
SA213 T11 Pipe Thickness | 3-12mm |
SA213 T11 Material Origin | European, Japanese, Korean, US, Russian, Indian (Strictly No Chinese Material) |
SA213 T11 Tube Tolerance | Cold drawn pipe: +/-0.1mm Cold rolled pipe: +/-0.05mm |
Craft | Cold rolled and Cold drawn |
SA213 T11 Tube Type | Seamless / ERW / Welded / Fabricated |
SA213 T11 Tube available in Form of | Round, Square, Rectangular, Hydraulic Etc. |
SA213 T11 Tube Length | Standard Double & In Cut length also. |
SA213 T11 Tube End | Plain End, Beveled End, Treaded |
Specialized in | ASME SA213 T11 Boiler Tube, SA213 T11 Heater Tube, SA213 T11 Heat Exchanger Tube |
SA213 gr T11 Additional Testing | NACE MR 0175, NACE TM0177, NACE TM0284, HIC TEST, SSC TEST, H2 SERVICE, IBR, etc. |
SA213 grade T11 Tube Application | Seamless Ferritic Alloy Steel Tube for High-Temperature Service |
ASTM A213 Gr T11 Tube Uses
ASTM A213 GR T11 tube uses are many and some of them include their being used in various high temperature services, petroleum industry, for power generation, etc. T11 boiler hot finished seamless tubes are used in heat recovery steam generators, industrial boilers, utility boilers, etc. ASTM A213 GR T11 tubes also find use in high press boilers, containers, super-heaters, heating-pipelines, high temperature re-heaters, coal-saving devices, etc.
SA213 T11 Tube suppliers
SA213 T11 Seamless Tube
ASTM A213 T11 Welded Tube
High Pressure T11 Boiler Tube
ASME SA213 T11 Tubing
T11 Alloy Steel Seamless Tube
ASTM A213 grade T11 Tubes
SA213 T11 Alloy Steel Seamless Tubing
SA213 T11 Chrome Moly Tubing
Alloy Steel T11 Round Tubes
ASTM A213 T11 Square Tube
ASTM A213 T11 Square hollow section
ASTM A213 T11 Rectangular Tube
SA213 T11 Seamless Alloy Tube Equivalent
Alloy Steel UNS K11597 Tube equivalent
Equivalent Standards: EN 10216-2, ASTM A335, GOST 550-75
Material: T11, K11597, K11597 Seamless Tubes
Equivalent Material: P11
Trade Name | Grade | UNS # | Heater Tubes |
1 1/4 Chrome | T11 | K11597 | A213 / SA213 |
2 1/4 Chrome | T22 | K21590 | A213 / SA213 |
5 Chrome | T5 | K41545 | A213 / SA213 |
9 Chrome | T9 | K90941 | A213 / SA213 |
T91 | T91 | K90901 | A213 / SA213 |
T92 | T92 | K92460 | A213 / SA213 |
MATERIAL | SPECIFICATION | |
|---|---|---|
ASTM | ASME | |
CHROME- MOLY ALLOY STEEL TUBE SEAMLESS | ASTM A213 T5 5% Chrome; ½% Moly | SA213 T5 5% Chrome; ½% Moly |
CHROME- MOLY ALLOY STEEL TUBE SEAMLESS | ASTM A213 T9 9% Chrome; 1% Moly | SA213 T9 9% Chrome; 1% Moly |
CHROME- MOLY ALLOY STEEL TUBE SEAMLESS | ASTM A213 T11 1-1/4% Chrome; ½% Moly | SA213 T11 1-1/4% Chrome; ½% Moly |
CHROME- MOLY ALLOY STEEL TUBE SEAMLESS | ASTM A213 T22 2-1/4% Chrome; 1% Moly | SA213 T22 2-1/4% Chrome; 1% Moly |
CHROME- MOLY ALLOY STEEL TUBE SEAMLESS | ASTM A213 T91 9% Chrome; 1% Moly + trace elements | SA213 T91 9% Chrome; 1% Moly + trace elements |
SA213 T11 Material Composition
SA213 T11 material composition is that it has an Elongation of 30%, a Yield Strength (min) of 220 Mpa and a Tensile Strength (min) of 415 Mpa. The UNS Designation of SA213 T11 is K11597 and it has a Chemical Composition of Phosphorus 0.025, Sulfur 0.025, Carbon 0.05 – 0.15, Molybdenum 0.44 – 0.65, Silicon 0.50 – 1.00, Chromium 1.00 – 1.50 and Manganese 0.30 – 0.60. A huge advantage of SA213 T11, due to its material composition, is its strength under loading. Important to note is that almost all pipe leaks and failures take place at the welded seam. But because of the material composition of SA213 T11, these pipes have huge strength benefits, as compared to pipes that are welded.
T11 Alloy Steel Tube Chemical Composition
Grade | C≤ | Mn | P≤ | S≤ | Si≤ | Mo |
|---|---|---|---|---|---|---|
T11 | 0.05~0.15 | 0.30~0.60 | 0.025 | 0.025 | 0.50~1.0 | 0.44~0.65 |
T11 Tube Material mechanical properties
T11 Chrome Moly Tubes Mechanical Properties
Grade | Tensile Strength, MPa | Yield Strength, MPa | Elongation, % | Hardness, HB |
T11 | 415 min | 205 min | 30 min | 179 max |
Alloy Steel T11 Seamless Tube Outside Diameter and Tolerance
Outside Diameter | OD Tolerance | WT Tolerance | Ovality Tolerance | Cut Length Tolerance |
OD≤ 12, 7 mm | ± 0, 13 mm | ± 15 % | – | + 3, 18 mm, – 0 mm |
12, 7 mm < OD ≤ 38, 1 mm | ± 0, 13 mm | ± 10 % | max, 1, 65 mm | + 3, 18 mm, – 0 mm |
38, 1 mm < OD ≤ 88, 9 mm | ± 0, 25 mm | ± 10 % | max, 2, 41 mm | + 4, 76 mm, – 0 mm |
ASTM A213/ ASME SA213 T11 Alloy Steel Tube Wall thickness & Tolerance
Hot rolled ASTM A213/ ASME SA213 T11 Alloy Steel Tube
| Outside Diameter, mm | Tolerance, % |
|---|---|---|
OD≤101.6, WT≤2.4 | +40/-0 | |
OD≤101.6, 2.4＜WT≤3.8 | +35/-0 | |
OD≤101.6, 3.8＜WT≤4.6 | +33/-0 | |
OD≤101.6, WT>4.6 | +28/-0 | |
OD>101.6, 2.4＜WT≤3.8 | +35/-0 | |
OD>101.6, 3.8＜WT≤4.6 | +33/-0 | |
OD>101.6, WT>4.6 | +28/-0 | |
Cold Drawn ASTM A213/ ASME SA213 T11 Alloy Steel Tube
| Outside Diameter, mm | Tolerance, % |
OD≤38.1 | +20/-0 | |
OD>38.1 | +22/-0 |
Length: 5800mm; 6000mm; 6096mm; 11800mm; 12000mm; and so on.
Max length: 16000mm
ASTM A213 T11 Tube Types | Out diameter | Wall thickness | Length |
|---|---|---|---|
SA213 T11 Seamless Tube (Custom Sizes) | 1/2″ NB – 60″ NB | As per requirement | Custom |
ASTM A213 T11 Welded Tube (in Stock + Custom Sizes) | 1/2″ NB – 24″ NB | As per requirement | Custom |
ASME SA213 T11 Tubing (Custom Sizes) | 1/2″ NB – 24″ NB | As per requirement | Custom |
ASTM A213 High Pressure T11 Boiler Tube | 16″ NB – 100″ NB | As per requirement | Custom |
Types of A213 T11 Material
Alloy Steel T11 Tubes | T11 Alloy Steel A335 Tube |
ASTM A213 grade T11 Tubes | T11 Alloy Steel Tubing |
High Pressure T11 Boiler Tube | ASME SA213 T11 Alloy Steel Rectangular Tube |
Alloy Steel T11 Seamless Tubes | Alloy Steel Gr T11 Heater Tube |
SA213 T11 Seamless Alloy Tube | IBR Alloy Steel T11 Tubes |
SA213 T11 Pipe | ASME SA / ASTM A213 T11 Tubes |
ASTM A213 Gr T11 Round Tube | T11 Tubes Dealer |
Alloy A213 T11 Seamless Square Tube | ASME SA213 T11 Alloy Steel Seamless Tube |
AISI T11 ERW Tube | ASTM A213 T11 Tubes |
SA213 T11 Tube Schedule Chart & SA213 T11 Tube weight
Welded and seamless SA213 T11 Tube
SA213 T11 Tube Dimensions and weights section modulus and gallons capacity per linear foot
Size NPS | Pipe O.D. | Wall Thickness | Pipe I.D. | Weight per Foot | Standard to XXHY | Schedule pipe# | Section Modulus | Gallon Capacity Per Linear Foot |
|---|---|---|---|---|---|---|---|---|
1/2 | 0.84 | 0.109 | 0.622 | 0.85 | STD | 40 | .0407 | .0158 |
0.147 | 0.546 | 1.09 | XHY | 80 | .0478 | .0122 | ||
0.188 | 0.464 | 1.31 | 160 | .0528 | .0088 | |||
0.294 | 0.252 | 1.72 | XXHY | .0577 | .0026 | |||
3/4 | 1.05 | 0.113 | 0.824 | 1.13 | STD | 40 | .0705 | .0277 |
0.154 | 0.742 | 1.48 | XHY | 80 | .0853 | .0225 | ||
0.219 | 0.612 | 1.95 | 160 | .1006 | .0153 | |||
0.308 | 0.434 | 2.44 | XXHY | .1103 | .0077 | |||
1 | 1.315 | 0.133 | 1.049 | 1.68 | STD | 40 | .1328 | .0449 |
0.179 | 0.957 | 2.17 | XHY | 80 | .1606 | .0374 | ||
0.250 | 0.815 | 2.85 | 160 | .1904 | .0271 | |||
0.358 | 0.599 | 3.66 | XXHY | .2136 | .0146 | |||
1 1/4 | 1.66 | 0.140 | 1.380 | 2.27 | STD | 40 | .2346 | .0777 |
0.191 | 1.278 | 3.00 | XHY | 80 | .2913 | .0666 | ||
0.250 | 1.160 | 3.77 | 160 | .3421 | .0549 | |||
0.382 | 0.896 | 5.22 | .4110 | .0328 | ||||
1 1/2 | 1.90 | 0.145 | 1.610 | 2.72 | STD | 40 | .3262 | .1058 |
0.200 | 1.500 | 3.63 | XHY | 80 | .4118 | .0918 | ||
0.281 | 1.338 | 4.86 | 160 | .5079 | .0730 | |||
0.400 | 1.100 | 6.41 | .5977 | .0494 | ||||
2 | 2.375 | 0.109 | 2.157 | 2.64 | 10 | .4205 | .1898 | |
0.154 | 2.067 | 3.66 | STD | 40 | .5606 | .1743 | ||
0.218 | 1.939 | 5.03 | XHY | 80 | .7309 | .1534 | ||
0.250 | 1.875 | 5.68 | .8045 | .1434 | ||||
0.281 | 1.813 | 6.29 | .8666 | .1344 | ||||
0.344 | 1.687 | 7.47 | 160 | .9806 | .1161 | |||
0.436 | 1.503 | 9.04 | XXHY | 1.1043 | .0922 | |||
2 1/2 | 2.875 | 0.120 | 2.635 | 3.53 | 10 | .6870 | .2833 | |
0.203 | 2.469 | 5.80 | STD. | 40 | 1.0640 | .2487 | ||
0.216 | 2.443 | 6.14 | 1.1169 | .2435 | ||||
0.250 | 2.375 | 7.02 | 1.2468 | .2301 | ||||
0.276 | 2.323 | 7.67 | XHY | 80 | 1.3386 | .2202 | ||
0.375 | 2.125 | 10.02 | 160 | 1.6371 | .1842 | |||
0.552 | 1.771 | 13.71 | XXXHY | 1.9971 | .1280 | |||
3 | 3.50 | 0.120 | 3.260 | 4.34 | 1.0411 | .4336 | ||
0.156 | 3.188 | 5.58 | 1.3122 | .4147 | ||||
0.172 | 3.156 | 6.12 | 1.4265 | .4064 | ||||
0.188 | 3.124 | 6.66 | 1.5342 | .3984 | ||||
0.216 | 3.068 | 7.58 | STD. | 40 | 1.7241 | .3840 | ||
0.250 | 3.000 | 8.69 | 1.9372 | .3672 | ||||
0.281 | 2.938 | 9.67 | 2.1207 | .3521 | ||||
0.300 | 2.900 | 10.26 | XHY | 80 | 2.2253 | .3431 | ||
0.438 | 2.624 | 14.34 | 160 | 2.8774 | .2811 | |||
0.600 | 2.300 | 18.6 | XXHY | 3.4243 | .2158 | |||
3 1/2 | 4.0 | 0.120 | 3.760 | 4.98 | 10 | 1.3776 | .5768 | |
0.226 | 3.548 | 9.12 | STD. | 140 | 2.3939 | .5136 | ||
0.250 | 3.500 | 10.02 | 2.6001 | .4998 | ||||
0.281 | 3.438 | 11.17 | 2.8562 | .4821 | ||||
0.318 | 3.364 | 12.52 | XHY | 80 | 3.1400 | .4617 | ||
0.636 | 2.728 | 22.87 | XXHY | 4.8795 | .3085 | |||
4 | 4.5 | 0.120 | 4.260 | 5.62 | 10 | 1.7612 | .7404 | |
0.156 | 4.188 | 7.24 | 2.2354 | .7156 | ||||
0.188 | 4.124 | 8.67 | 2.6296 | .6942 | ||||
0.203 | 4.094 | 9.32 | 2.8173 | .6838 | ||||
0.219 | 4.062 | 10.02 | 3.0184 | .6725 | ||||
0.237 | 4.026 | 10.80 | STD. | 40 | 3.2145 | .6613 | ||
0.250 | 4.000 | 11.36 | 3.3611 | .6528 | ||||
0.281 | 3.938 | 12.67 | 60 | 3.7021 | .6326 | |||
0.312 | 3.876 | 13.97 | 4.0273 | .6126 | ||||
0.337 | 3.826 | 15.00 | XHY | 80 | 4.2713 | .5972 | ||
0.438 | 3.624 | 19.02 | 120 | 5.1790 | .5361 | |||
0.531 | 3.438 | 22.53 | 160 | 5.8997 | .4822 | |||
0.674 | 3.152 | 27.57 | XXHY | 6.7927 | .4054 | |||
5 | 5.563 | 0.188 | 5.187 | 10.80 | 4.1161 | 1.0979 | ||
0.219 | 5.125 | 12.51 | 4.7279 | 1.0716 | ||||
0.258 | 5.047 | 14.63 | STD. | 40 | 5.4500 | 1.0391 | ||
0.281 | 5.001 | 15.87 | 5.8644 | 1.0204 | ||||
0.312 | 4.939 | 17.51 | 6.4074 | .99647 | ||||
0.344 | 4.875 | 19.19 | 6.9358 | .9696 | ||||
0.375 | 4.813 | 20.80 | XHY | 80 | 7.4300 | .9449 | ||
0.500 | 4.563 | 27.06 | 120 | 9.2534 | .8495 | |||
0.625 | 4.313 | 32.99 | 160 | 10.7976 | .7590 | |||
0.750 | 4.063 | 38.59 | XXHY | 12.0954 | .6734 | |||
6 | 6.625 | 0.109 | 6.407 | 7.59 | 5 | 3.5769 | 1.6748 | |
0.134 | 6.357 | 9.30 | 10 | 4.3475 | 1.6488 | |||
0.156 | 6.313 | 10.79 | 5.0107 | 1.6260 | ||||
0.188 | 6.249 | 12.94 | 5.9351 | 1.5937 | ||||
0.203 | 6.219 | 13.94 | 6.3804 | 1.5780 | ||||
0.219 | 6.187 | 15.00 | 6.8261 | 1.5620 | ||||
0.250 | 6.125 | 17.04 | 7.6905 | 1.5306 | ||||
0.280 | 6.065 | 18.99 | STD. | 40 | 8.4958 | 1.5008 | ||
0.312 | 6.001 | 21.06 | 9.3416 | 1.4688 | ||||
0.344 | 5.937 | 23.10 | 10.111 | 1.4391 | ||||
0.375 | 5.875 | 25.05 | 10.893 | 1.4082 | ||||
0.432 | 5.761 | 28.60 | XHY | 80 | 12.224 | 1.3541 | ||
0.500 | 5.625 | 32.74 | 13.711 | 1.2909 | ||||
0.562 | 5.501 | 36.43 | 120 | 14.9806 | 1.2346 | |||
0.625 | 5.375 | 40.09 | 16.1821 | 1.1787 | ||||
0.719 | 5.187 | 45.39 | 160 | 17.8243 | 1.0977 | |||
0.864 | 4.897 | 53.21 | XXHY | 20.025 | .9784 | |||
1.000 | 4.625 | 60.13 | 21.7719 | .8727 | ||||
1.125 | 4.375 | 66.14 | 23.1237 | .7809 |
Carbon steel is a large category of steel that encompasses many varying chemical compositions. Each type of carbon steel requires different considerations when welding. For example if you choose Low carbon steel to weld which is typically the most readily welded steel in a room temperature environment. These low carbon steel suitable for welding include C1008, C1018, A36, A1011 and A500. Medium carbon steel such as C1045 typically requires preheat and post-heat treatment to avoid weld cracking. High carbon steel is even more prone to weld cracking than the other two groups of carbon steel. Welding high carbon steel will most likely require very thorough preheating and post-heating processes to avoid this. It could also require special welding filler metals.
SA213 T11 Tube welding is used extensively for pipe welding, aerospace, aviation, biomedical implants, fabrication of race cars, choppers, etc.
Client Reference and Applications
Our SA213 T11 Tube are suitable for Aerospace, Plant manufacturing, Machine engineering, Power generation and Nuclear Power Plant etc. We are supplying high quality SA213 T11 Tube to our clients globally.
Special Steel
- Carbon Steel Pipe
- ASTM A106 Grade B Pipe
- ASTM A53 Grade B Pipe
- ASTM A333 Grade 6 Pipe
- IS 4923 Steel Pipes
- ASTM A179 Pipe
- ASTM A192 Tube
- BS 3059 Boiler Tube
- SA 210 Boiler Tube
- DIN 2391 ST 52
- ASTM A671 Pipe
- ASTM A671 Grade CC60
- ASTM A671 Grade CC65
- ASTM A671 Grade CC70
- ASTM A672 Pipe
- ASTM A672 Grade C55
- ASTM A672 Grade C60
- ASTM A672 Grade C65
- ASTM A672 Grade C70