Difference Between Inconel and Titanium
Inconel Vs Titanium
If you not sure which material would be most suitable for your application, here we’ve writtent the content with main features & material properties that differentiate Difference Between Inconel and Titanium.Inconel
Inconel® is a registered trademark (of Special Metals Corporation) referring to a family of austenitic nickel-chromium super alloys. Inconel® is a material that is specifically optimized for some of the toughest use conditions to be found in manufacturing while Titanium is a chemical element with symbol Ti and atomic number 22. It is a lustrous transition metal with a silver color, low density, and high strength.Inconel Material Specification
- Inconel 600: Solid solution strengthened.
- Inconel 601
- Inconel 625: Acid resistant, good weldability. The LCF version is typically used in bellows. Ideal for hardware and components in the power, aerospace and chemical processing industries. Offered in sheet, plate, bar and forgings.
- Inconel 718: Gamma double prime strengthened with good weldability. The preferred material for cryogenic storage tanks, turbines, downhole shafts and wellhead parts offered in sheet, plate and bar.
- Inconel X750: Commonly used for gas turbine components, including blades, seals and rotors.
- Inconel 907
- Inconel 909
- Inconel 706
- Inconel 617
- Inconel 751: Increased aluminium content for improved rupture strength in the 1600 °F range.
- Inconel 792: Increased aluminium content for improved high temperature corrosion properties, used especially in gas turbines.
- Inconel 939: Gamma prime strengthened to increase weldability.
- Inconel 188: Readily fabricated for commercial gas turbine and aerospace applications. Offered in sheet, plate and bar.
- Inconel 690: Low cobalt content for nuclear applications, and low resistivity.
- Inconel 713C: Precipitation hardenable nickel-chromium base cast alloy.
- Inconel 230: Inconel 230 Plate & Sheet mainly used by the power, aerospace, chemical processing and industrial heating industries, Aerospace Materials.
Inconel Composition
| Inconel | Element (% by mass) | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Ni | Cr | Fe | Mo | Nb | Co | Mn | Cu | Al | Ti | Si | C | S | P | B | |
| 600 | 72.0 | 14.0–17.0 | 6.0–10.0 | 1.0 | 0.5 | 0.5 | 0.15 | 0.015 | |||||||
| 617 | 44.2–56.0 | 20.0–24.0 | 3.0 | 8.0–10.0 | 10.0–15.0 | 0.5 | 0.5 | 0.8–1.5 | 0.6 | 0.5 | 0.15 | 0.015 | 0.015 | 0.006 | |
| 625 | 58.0 | 20.0–23.0 | 5.0 | 8.0–10.0 | 3.15–4.15 | 1.0 | 0.5 | 0.4 | 0.4 | 0.5 | 0.1 | 0.015 | 0.015 | ||
| 690 | 59.5 | 30 | 9.2 | 0.35 | 0.01 | 0.02 | 0.35 | 0.019 | 0.003 | ||||||
| 718 | 50.0–55.0 | 17.0–21.0 | balance | 2.8–3.3 | 4.75–5.5 | 1.0 | 0.35 | 0.2–0.8 | 0.65–1.15 | 0.3 | 0.35 | 0.08 | 0.015 | 0.015 | 0.006 |
| X-750 | 70.0 | 14.0–17.0 | 5.0–9.0 | 0.7–1.2 | 1.0 | 1.0 | 0.5 | 0.4–1.0 | 2.25–2.75 | 0.5 | 0.08 | 0.01 | |||
Inconel alloys
Alloys of inconel include:- Inconel 600: Solid solution strengthened
- Inconel 601
- Inconel 625: Acid resistant, good weldability. The LCF version is typically used in bellows.
- Inconel 690: Low cobalt content for nuclear applications, and low resistivity
- Inconel 713C: Precipitation hardenable nickel-chromium base cast alloy
- Inconel 718: Gamma double prime strengthened with good weldability
- Inconel 751: Increased aluminium content for improved rupture strength in the 1600 °F range
- Inconel 792: Increased aluminium content for improved high temperature corrosion properties, used especially in gas turbines
- Inconel 939: Gamma prime strengthened to increase weldability
Inconel Equivalent Grades
| STANDARD | WERKSTOFF NR. | UNS | GOST | AFNOR | JIS | BS | EN | OR |
|---|---|---|---|---|---|---|---|---|
| Inconel 600 | 2.4816 | N06600 | МНЖМц 28-2.5-1.5 | NC15FE11M | NCF 600 | NA 13 | NiCr15Fe | ЭИ868 |
| Inconel 601 | 2.4851 | N06601 | ХН60ВТ | NC23FeA | NCF 601 | NA 49 | NiCr23Fe | ЭИ868 |
| Inconel 617 | 2.4663 | N06617 | ||||||
| Inconel 625 | 2.4856 | N06625 | ХН75МБТЮ | NC22DNB4M | NCF 625 | NA 21 | NiCr22Mo9Nb | ЭИ602 |
| Inconel 690 | 2.4642 | N06690 | ||||||
| Inconel 718 | 2.4668 | N07718 | ||||||
| Inconel 725 | – | N07725 | ||||||
| Inconel X-750 | 2.4669 | N07750 |
Inconel Melting Point, Density and Tensile Strength
| Grade | Density | Melting Point | Tensile Strength | Yield Strength (0.2% Offset) |
Elongation |
|---|---|---|---|---|---|
| 600 | 8.47 g/cm3 | 1413 °C (2580 °F) | Psi – 95,000 , MPa – 655 | Psi – 45,000 , MPa – 310 | 40 % |
| 601 | 8.1 g/cm3 | 1411 °C (2571 °F) | Psi – 80,000 , MPa – 550 | Psi – 30,000 , MPa – 205 | 30 % |
| 617 | 8.3g/cm³ | 1363°C | ≥ 485 MPa | ≥ 275 MPa | 25 % |
| 625 | 8.4 g/cm3 | 1350 °C (2460 °F) | Psi – 135,000 , MPa – 930 | Psi – 75,000 , MPa – 517 | 42.5 % |
| 690 | 8.3g/cm³ | 1363°C | ≥ 485 MPa | ≥ 275 MPa | 25 % |
| 718 | 8.2 g/cm3 | 1350 °C (2460 °F) | Psi – 135,000 , MPa – 930 | Psi – 70,000 , MPa – 482 | 45 % |
| 725 | 8.31 g/cm3 | 1271°C–1343 °C | 1137 MPa | 827 MPa | 20 % |
| X-750 | 8.28 g/cm3 | 1430°C | 1267 MPa | 868 MPa | 25 % |
Titanium
| Specifications | Titanium Grade 2 | Titanium Alloy | Inconel Grade 625 | Stainless Steel 321 | Stainless Steel 304 |
|---|---|---|---|---|---|
| Temperature rating | 450°C | 800°C | 1100°C | 950°C | 860°C |
| Typical Weight/M 3″ Tube | 1.28kg | 0.96-1.28kg | 1.00-1.40kg | 1.7-2.26kg | 2.26kg |
- Titanium is lighter
- Titanium is harder to mark and you will see less scratches.
- Inconel is a bit stiffer than Titanium
- Highest strength to weight ration of any metal
- High corrosion resistance
- High fatigue resistance
- Non-toxic
- Material stiffness not as good as aluminum alloys or carbon fiber
- Comparatively high cost
| Grade | Description |
|---|---|
| Titanium Grade 1 | Unalloyed titanium, low oxygen, low strength |
| Titanium Grade 2 | Unalloyed titanium, standard oxygen, medium strength |
| Titanium Grade 3 | Unalloyed titanium, medium oxygen, high strength |
| Titanium Grade 4 | Unalloyed titanium, high oxygen, extra high strength |
| Titanium Grade 5 | Titanium alloy (6% aluminum, 4% vanadium) |
| Titanium Grade 7 | Unalloyed titanium plus 0.12% to 0.25% palladium, standard oxygen, medium strength |
| Titanium Grade 9 | Titanium alloy (3% aluminum, 2.5% vanadium), high strength. Mainly aerospace applications |
| Titanium Grade 11 | Unalloyed titanium plus 0.12% to 0.25% palladium, low oxygen, low strength |
| Titanium Grade 12 | Titanium alloy (0.3% molybdenum, 0.8% nickel), high strength |
| Titanium Grade 13 | Titanium alloy (0.5% nickel, 0.05% ruthenium), low oxygen |
| Titanium Grade 14 | Titanium alloy (0.5% nickel, 0.05% ruthenium), standard oxygen |
| Titanium Grade 15 | Titanium alloy (0.5% nickel, 0.05% ruthenium), medium oxygen |
| Titanium Grade 16 | Unalloyed titanium plus 0.04% to 0.08% palladium, standard oxygen, medium strength |
| Titanium Grade 17 | Unalloyed titanium plus 0.04% to 0.08% palladium, low oxygen, low strength |
| Titanium Grade 18 | Titanium alloy (3% aluminum, 2.5% vanadium plus 0.04% to 0.08% palladium) |
| Titanium Grade 19 | Titanium alloy (3% aluminum, 8% vanadium, 6% chromium, 4% zirconium, 4% molybdenum) |
| Titanium Grade 20 | Titanium alloy (3% aluminum, 8% vanadium, 6% chromium, 4% zirconium, 4% molybdenum) plus 0.04% to 0.08% palladium |
| Titanium Grade 21 | Titanium alloy (15% molybdenum, 3% aluminum, 2.7% niobium, 0.25% silicon) |
| Titanium Grade 23 | Titanium alloy (6% aluminum, 4% vanadium, extra low interstitial, ELI) |
| Titanium Grade 24 | Titanium alloy (6% aluminum, 4% vanadium) plus 0.04% to 0.08% palladium |
| Titanium Grade 25 | Titanium alloy (6% aluminum, 4% vanadium) plus 0.3% to 0.8% nickel and 0.04% to 0.08% palladium |
| Titanium Grade 26 | Unalloyed titanium plus 0.08% to 0.14% ruthenium, standard oxygen, medium strength |
| Titanium Grade 27 | Unalloyed titanium plus 0.08% to 0.14% ruthenium, low oxygen, low strength |
| Titanium Grade 28 | Titanium alloy (3% aluminum, 2.5% vanadium) plus 0.08% to 0.14% ruthenium |
| Titanium Grade 29 | Titanium alloy (6% aluminum, 4% vanadium with extra low interstitial elements (ELI) plus 0.08% to 0.14% ruthenium |
Titanium & Titanium Alloys ASTM Specifications
| ASTM Specification | Description |
|---|---|
| ASTM-F136-98e1 | Wrought Titanium-6 Aluminum-4 Vanadium ELI (Extra Low Interstitial) Alloy (UNSR56401) for Surgical Implant Applications |
| ASTM-F67-00 | Unalloyed Titanium for Surgical Implant Applications (UNS R50250, UNS R50400, UNS R50550, UNS R50700) |
| ASTM-F1108-97a | Ti6AL4V Alloy Castings for Surgical Implants (UNS R56406) |
| ASTM-F-620-00 | Alpha Plus Beta Titanium Alloy Forgings for Surgical Implants |
| ASTM-F1472-99 | Wrought Titanium-6 Aluminum-4 Alloy for Surgical Implant Applications (UNS R56400) |
| ASTM-F1341-99 | Unalloyed Titanium Wire UNS R50250, UNS R50400, UNS R50550, UNS R50700, for Surgical Implant Applications |
| ASTM-F1295-97a | Wrought Titanium-6 Aluminum-7 Niobium Alloy for Surgical Implant Applications (UNS R56700) |
| ASTM B265-99 | Titanium and Titanium Alloy Strip, Sheet, and Plate |
| ASTM-B299-99 | Titanium Sponge |
| ASTM-B338-99 | Seamless and Welded Titanium & Titanium Alloy Tubes for Condensers & Heat Exchangers |
| ASTM-B348-00 | Titanium and Titanium Alloy Bars and Billets |
| ASTM-B363-00 | Seamless and Welded Unalloyed Titanium & Titanium Alloy Welding Fittings |
| ASTM-B367-93 (1998) | Titanium and Titanium Alloy Castings |
| ASTM-B381-00 | Titanium and Titanium Alloy Forgings |
| ASTM-B600-91 (1997)e1 | Standard Guide for Descaling and Cleaning Titanium & Titanium Alloy Surfaces |
| ASTM-B861-00 | Titanium and Titanium Alloy Seamless Pipe |
| ASTM-B862-99 | Titanium and Titanium Alloy Welded Pipe |
| ASTM-B863-99a | Titanium and Titanium Alloy Wire |
| Brinell Hardness | Rockwell B Scale | Rockwell C Scale | Approximate Tensile (lbs. psi) | Brinell Hardness | Rockwell B Scale | Approximate Tensile (lbs. psi) |
|---|---|---|---|---|---|---|
| 653 | – | 62 | 324,000 | 217 | 95 | 103,000 |
| 627 | – | 60 | 311,000 | 212 | 96 | 103,000 |
| 601 | – | 68 | 306,000 | 207 | 95 | 101,000 |
| 578 | – | 57 | 290,000 | 202 | 94 | 98,000 |
| 555 | – | 56 | 284,000 | 197 | 93 | 96,000 |
| 534 | – | 54 | 270,000 | 192 | 92 | 93,000 |
| 514 | – | 53 | 263,000 | 187 | 91 | 91,000 |
| 495 | – | 51 | 250,000 | 183 | 90 | 89,000 |
| 477 | – | 50 | 243,000 | 179 | 89 | 87,000 |
| 461 | – | 49 | 236,000 | 174 | 88 | 85,000 |
| 444 | – | 47 | 223,000 | 170 | 87 | 83,000 |
| 429 | – | 47 | 217,000 | 166 | 86 | 81,000 |
| 415 | – | 45 | 211,000 | 163 | 85 | 80,000 |
| 401 | – | 42 | 194,000 | 159 | 84 | 78,000 |
| 388 | – | 41 | 188,000 | 156 | 83 | 77,000 |
| 375 | – | 40 | 182,000 | 153 | 82 | 76,000 |
| 363 | – | 38 | 171,000 | 149 | 81 | 75,000 |
| 352 | – | 37 | 166,000 | 146 | 80 | 74,000 |
| 331 | – | 36 | 162,000 | 143 | 79 | 73,000 |
| 321 | – | 34 | 153,000 | 140 | 78 | 71,000 |
| 311 | – | 33 | 148,000 | 137 | 77 | 70,000 |
| 302 | – | 32 | 144,000 | 134 | 76 | 69,000 |
| 293 | – | 31 | 140,000 | 131 | 74 | 67,000 |
| 285 | – | 30 | 136,000 | 128 | 73 | 66,000 |
| 277 | – | 29 | 132,000 | 126 | 72 | 65,000 |
| 269 | – | 28 | 129,000 | 124 | 71 | 63,000 |
| 262 | – | 27 | 126,000 | 121 | 70 | 62,000 |
| 255 | – | 25 | 120,000 | 118 | 69 | 61,000 |
| 248 | – | 24 | 117,000 | 116 | 68 | 60,000 |
| 241 | 100 | 23 | 115,000 | 114 | 67 | 59,000 |
| 235 | 99 | 22 | 112,000 | 112 | 66 | 58,000 |
| 229 | 98 | 21 | 110,000 | 109 | 65 | 57,000 |
| 223 | 97 | 20 | 108,000 | 107 | 64 | 55,000 |
Titanium Gauge Conversion
| Gauge Numbers | US Standards | Gauge Numbers | US Standards |
|---|---|---|---|
| 0 | 0.312 | 16 | 0.0625 |
| 1 | 0.281 | 17 | 0.0562 |
| 2 | 0.266 | 18 | 0.05 |
| 3 | 0.25 | 19 | 0.0438 |
| 4 | 0.234 | 20 | 0.0375 |
| 5 | 0.219 | 21 | 0.0344 |
| 6 | 0.203 | 22 | 0.0312 |
| 7 | 0.188 | 23 | 0.0281 |
| 8 | 0.172 | 24 | 0.025 |
| 9 | 0.156 | 25 | 0.0219 |
| 10 | 0.141 | 26 | 0.0188 |
| 11 | 0.125 | 27 | 0.0172 |
| 12 | 0.109 | 28 | 0.0156 |
| 13 | 0.0938 | 29 | 0.0141 |
| 14 | 0.0781 | 30 | 0.0125 |
| 15 | 0.0703 |
| Titanium Equivalent Grades | ||
|---|---|---|
| STANDARD | WERKSTOFF NR. | UNS |
| Titanium Gr 1 | 3.7025 | R50250 |
| Titanium Gr 2 | 3.7035 | R50400 |
| Titanium Gr 5 | 3.7165 | R56400 |
| Titanium Gr 7 | 3.7235 | R52400 |
| Titanium Gr 9 | 3.7195 | R56320 |
| Titanium Gr 12 | 3.7105 | R53400 |
| Titanium Chemical Composition | ||||||
|---|---|---|---|---|---|---|
| Titanium Gr 2 | 0.10 max | 0.03 max | 0.25 max | 0.015 max | bal | 0.30 max |
| Titanium Gr 5 | 0.10 max | 0.05 max | 0.20 max | 0.015 max | bal | 0.30 max (V: 3.5-4.5, Al: 5.5-6.75) |
| Titanium Hardness and Tensile Strength | ||||||
| Titanium Gr 2 | 50 (Min.Tensile) | 40 (Min.Yield) | 14.9 | 103 GPa | 0.34-0.10 | |
| Titanium Gr 5 | 130 (Min.Tensile) | 120 (Min.Yield) | 16.4 | 114 GPa | 0.30-0.33 | |
| Grade | C | N | O | H | Ti | Fe |
|---|---|---|---|---|---|---|
| Titanium Gr 1 | .08 max | .03 max | .18 max | .015 max | bal | .20 max |
| Titanium Gr 4 | .08 max | .05 max | .40 max | .015 max | bal | .50 max |
| Titanium Gr 7 | .08 max | .03 max | .25 max | .015 max | bal | .30 max |
| Titanium Gr 9 | .08 max | .03 max | .15 max | .015 max | – | .25 max |
| Titanium Gr 12 | .08 max | .03 max | .25 max | 0.15 max | – | .30 max |
There's a world of steel & metals, Click on the below articles to check out the differences & learn more.
- Difference Between Low-Alloy Steel & High-Alloy Steel
- Differences Between 52100 & E52100 Steel
- Differences Between 304 and 316 Stainless Steel
- Differences Between A358 and A312
- Difference Between Inconel and Incoloy
- Difference Between Monel and Inconel
- Difference Between Hastelloy and Inconel
- Difference Between Inconel 625 and 825
- Difference Between Inconel 600 and 625
- Difference Between Inconel 625 and 718
- Difference Between Monel 400 and 500
- Difference Between Inconel and Monel
- Difference Between Inconel 600 and 601
- Difference Between Inconel 600 and 800
- Difference Between Inconel and Stainless Steel
- Difference Between Inconel and Nimonic
- Difference Between Inconel and Titanium
- Difference Between Duplex and Inconel
- Difference Between Inconel 825 and Incoloy 825
- Difference Between Inconel 625 and Incoloy 625
- Difference Between Inconel 800 and Incoloy 800
- Difference Between Inconel X750 and Inconel 718
- Difference Between Monel and Inconel 625
- Difference Between Nickel and Inconel
- Difference Between Inconel 600 and 718
- Difference Between Inconel 825 and 925
- Difference Between Inconel and SS 316
- Difference Between PSL1 and PSL2 Pipe
- Jindal Pipes Limited
- Stainless steel tube dimensions
- Carbon steel pipe sizes
- Stainless steel pipe sizes
- Alloy steel pipe sizes
Looking to buy Inconel 600 Tube? Alloy 600 Tube?
Check price of Inconel 600 Tube in India
Special Steel
- Carbon Steel Pipe
- ASTM A106 Grade B Pipe
- ASTM A53 Grade B Pipe
- ASTM A333 Grade 6 Pipe
- IS 4923 Steel Pipes
- ASTM A179 Pipe
- ASTM A192 Tube
- BS 3059 Boiler Tube
- SA 210 Boiler Tube
- DIN 2391 ST 52
- ASTM A671 Pipe
- ASTM A671 Grade CC60
- ASTM A671 Grade CC65
- ASTM A671 Grade CC70
- ASTM A672 Pipe
- ASTM A672 Grade C55
- ASTM A672 Grade C60
- ASTM A672 Grade C65
- ASTM A672 Grade C70